Articles
ALERT: Washer Installation Damage |
|
WASHER INSTALLATION: Recently it has been discovered that PUMP HARNESS WIRE ROUTING has been getting damaged when removing the packaging material from the bottom of the washer.
 |
 |
 |
 |
|
1. When removing the packaging from the bottom of the unit, you will notice two cutouts that allow components to set slightly underneath the packaging. |
2. If the washer packaging is not removed correctly, the packaging can snag on the pump harness wire routing and break the harness. |
3. Make sure to carefully lay the washer on its side and remove the packaging without snagging the pump harness. |
4. When the packaging is removed properly, there is no damage to the pump harness. |